Bose Soundbar Stops Working for Awhile and Then Starts Again

There is zero quite like the crisp, clean sound that comes out of a Bose soundbar. When information technology is not working, yet, information technology can be a real disappointment. Fortunately, the ready is often easy and quick.

A problem with a Bose soundbar not working can be traced to the power. If information technology has stopped working altogether, it may be a matter of a tripped breaker or a bad receptacle. If it has fractional ability, Bluetooth is oftentimes to blame.

As nosotros expect down through some of the possible reasons why your Bose soundbar is not working, information technology's good to know that you are certainly not lone. Many people have experienced these problems, but they discover that the fix is ofttimes easy to do.

Bose Soundbar Not Working

The first thing to check with your Bose soundbar is if information technology has stopped working altogether. Peradventure the Bluetooth works, just it doesn't seem as if anything else is working. Hither are some things to check and ready.

Low Volume Level

The book level is a common reason why most people think that their Bose soundbar is not working. Perhaps your remote command needs new batteries or it may exist that the sound settings on the TV are not connecting to the soundbar itself.

Try turning upward the volume on the soundbar direct rather than using the remote.

When adjusting the soundbar volume level, be cautious of the volume level when it finally comes on. Information technology could exist very loud.

Multiple Bose Devices on Network

There can only be i Bose device on the network. If you happen to exist a big fan of this blazon of product, you may take multiple devices in your domicile.

Typically, people will choose the primary device and put it on their network. This can be the soundbar and you may exist able to tie in additional speakers using Bluetooth.

Bad HDMI Cable

If the HDMI cable betwixt your soundbar and the Tv set is bad, it will not send a signal. You can try another HDMI cable. Possibly there is another device that gives yous easy access to a new cablevision.

In that location may besides exist other options rather than using HDMI. This could include using an optical cable. At times, yous may even find that your audio quality increases every bit you change the way that information technology connects to the Television.

HDMI Connexion Requiring Reset

If the cable is fine, you may need to reset the connectedness. This is done by turning off both the Bose soundbar and the Idiot box and unplugging them.

Disconnect the HDMI cable and look at least 60 seconds before reconnecting it. Reconnect the ability to the television first and wait for it to fully reset.

Finally, turn on the power to the Bose soundbar. Remember that it may take up to a infinitesimal for the soundbar to reboot.

Incidentally, this is very similar to a soft reset of the soundbar itself. The simply difference is that yous are disconnecting the HDMI cable. It is usually good to practice a full reset, including the cablevision just to make certain.

Consumer-Electronics Control (CEC) Compliance Issues

In some cases, information technology may be necessary to disconnect CDC on the television. Your Bose soundbar may non exist fully compliant and it could be causing issues.

Enhanced Audio Return Channel (eARC) Functionality

If your Bose soundbar is non an eARC-equipped device, you may need to turn off eARC on the TV. At times, the eARC tin can act erratically.

Firmware Upgrades Needed

Bose may, at times, update the firmware to the soundbar. Y'all can download the firmware online and transfer it to a USB stick. Information technology can then exist uploaded to the soundbar and after restarting, information technology may set the trouble.

Restore Factory Settings

This is typically the concluding option, but information technology is one that tin can correct almost any problem. Here are the steps to perform a factory reset of your Bose soundbar.

Step one. Disconnect Banana

If you lot have Alexa, Google banana, or some other vocalisation banana associated with your Bose soundbar, you will take to disable them first. This is typically washed through the app or, in the instance of Alexa, through the Amazon website.

Step two. Push button Power and Skip Forward

On the remote, you will need to depress the skip forward and power buttons for five seconds. They must exist pressed simultaneously.

Every bit the product reboots, the light bar will glow a solid amber on the front of the soundbar. This will let you know that it is working.

If this doesn't seem to work, brand sure that the batteries to the remote are not expressionless.

Contact Tech Support

Bose tech support is known for being helpful. You can contact tech support directly merely you may find information technology more than helpful to work with the local store.

If possible, take it to the shop and have a technician at the shop look at the soundbar for you. If any more troubleshooting needs to be done, they tin contact tech support at the store.

Bose Sound Bar Won't Turn on

The about common reason why a Bose soundbar won't plow on is that there is no power to the unit of measurement. Here are a few things to check:

Billow Box

A tripped breaker will end the flow of electricity to the entire excursion. Look for a breaker that is out of line with the others and may take a small-scale red spot showing on the side.

Turn the breaker to the off position and back to the on position to reset it.

Receptacle

Although receptacles typically have a long lifespan, they do get bad from time to fourth dimension. Check the receptacle by plugging in another device, such every bit a lamp to see if it works.

Power Strip

All besides frequently, we overload a power strip and it can cause problems with the soundbar. Bypass the power strip by plugging the soundbar straight into a wall receptacle.

Overloaded Circuit

In some cases, nosotros may be trying to run too many electric appliances on the aforementioned circuit. Try unplugging some of the devices and see if the soundbar begins to piece of work properly.

Another effect is for the remote command batteries to of died. Try turning on the power directly with the power push on the soundbar.

Unplug the soundbar and plug it back in. Did it make a tone? If information technology did, it is probably a problem with the remote command or the connection. If not, check the power options.

Bose Soundbar Won't Turn Off

If the Bose soundbar is non turning off, you lot may need to re-sync information technology to the boob tube controls. This can be done with a soft reset, which involves unplugging the tv and soundbar for a minute and plugging them back in.

Information technology might also be an upshot with the buttons or control board. If that is the case, y'all will need the help of customer support. You can call them direct or go to a local store.

Finally, yous can perform a factory reset using the remote control. Printing the ability and skip forward button simultaneously for a few seconds until the product reboots.

Bose Soundbar Keeps Flashing/Blinking

There are multiple lights on the Bose soundbar and each of them has its own meaning. Starting from the left to the right, they are:

Wi-Fi

A flashing calorie-free ways that the soundbar is connecting to Wi-Fi or the system is muted. A flashing amber light means the soundbar is disconnected.

TV Connection

A flashing light means the source or organisation is muted.

SoundTouch

If a light is flashing, it means it is connecting to the source. An amber low-cal ways the skip limit is reached and white lite may mean the source or organisation is muted.

Bluetooth

If a blueish light is flashing, it is in discovery mode. If white light is flashing, it is connecting the source.

Connectivity

A flashing white low-cal means it is connecting. A flashing amber light ways the speakers are not connected.

Bose Sound Bar Keeps Turning on

If the soundbar comes on, seemingly on its own, it may be due to a number of issues. Sometimes, it is the auto-wake characteristic. Make sure the feature is disabled.

A universal remote tin sometimes cause the soundbar to plough on, even a remote for a fan or another device may be the culprit.

Check for a firmware update. Download the update to a retention stick and plug information technology into the Bose soundbar to update.

Bose Sound Bar Keeps Shutting off

This may really be normal beliefs. The soundbar will automatically shut off if information technology is not in utilise for xx minutes. If it shuts off inappropriately, consider the following.

Connections

Check all of the connections and wires, including the power string and HDMI cable. Replace them if necessary.

Surge Protector

Bypass the surge protector by plugging the soundbar directly into a wall receptacle. Employ the soundbar for a while to see if information technology works.

Soft Reset

Finally, you can perform a soft reset by unplugging the soundbar for 60 seconds and plugging information technology back in. That will oftentimes correct many issues.

A problem with a Bose soundbar not working is associated with the power supply. Check the breaker box, the receptacle, and the remote control. Endeavor plugging the soundbar directly into a wall receptacle and bypassing the ability strip.

Bose Bluetooth (Not Discoverable/Non Showing Up/How To)

Bose Keeps (Skipping/Cutting Out/Dropping Out/Stopping/Falling Out)

Bose Volume Not Working (No Sound/Not Loud Plenty/Fluctuates)

Bose Microphone Non Working/How To

lockhartchemb1995.blogspot.com

Source: https://readytodiy.com/bose-soundbar-not-working-0051/